Home

PRODUCTS
Fiber Rotary Joints
Electrical Slip Rings
Fiber Components
Fiber Polishers

SERVICES
Fiber Termination
Outdoor Fiber Patchcords
Laser Pigtailing
Training

SOLUTIONS
Sliprings
RF Rotary Joints
Fluid Rotary Unions
Multiplexers
Media Converters
ISO logo
Home | Company | LEED | News | Terms | Learning | Career | Contact  
609.588.8801 609.895.9552
SERVICES: Custom products

CLICK for larger view

6x3-channel electro-optical slipring/rotary joint
A 6-channel high-voltage slip ring and a 3-channel fiber optic rotary joint are integrated to form a hybrid rotary joint. All electrical wires and fiber cables are terminated with standard connectors. An weather-proof utility box is attached to the rotor for convenient access to fiber connectors.

CLICK for larger view

2x2-channel electro-optical slipring/rotary joint
A 2-channel high-voltage slip ring and a 2-channel fiber optic rotary joint are integrated to form a hybrid rotary joint with receptacles on both ends. Electrical wires and fiber cables are terminated with standard Delphi connectors within the unit. High strength Nylon was used to reduce the weight.

CLICK for larger view

5-channel fiber optic rotary joint with custom adapter
A standard 5-channel fiber optic rotary joint is fitted with a special adapter and two drive pins. The unit fits into an existing mounting scheme.

CLICK for larger view

Fiber-coupled turnkey DPSS (Nd:YAG) laser
This laser light source is PM fiber coupled with a build-in isolator to increase power stability. Optical power output can be adjusted through the control knob from 0 to maximum level.

Wavelength: 1064 nm
Output power: >5 mW
Fiber type: 3M Tiger (Extinction ratio: 16 dB)
Connector type: FC/APC keyed to slow axis
Isolation: 48 dB
Output stability: ~1% (short term)

CLICK for larger view

CLICK for larger view

Turnkey dual-diode laser light source
Sometimes it is desirable to have two different laser beams coming out of the same fiber and controlled by one instrument. The pictures show an un-cooled 980/1480 nm laser light sources. With a flip of a switch one can check the power of each diode. Separate knobs control the output powers individually. The common output SMA receptacle is located on the back panel, made to the customer requirement. The typical lead time for an item like this is 8 weeks. One can order any combination of popular diode wavelengths from 635 to 1650 nm.

CLICK for larger view

CLICK for larger view

Laser & signal collection system with fiber Couplings
This all-in-one laser system contains a frequency doubled (532 nm) Nd:YAG laser and a fiber optic launch and collection mechanism (Laser power supply not shown). The laser beam is delivered through one of the two SMA coupling ports. A multimode fiber is used to carry both the emission and fluorescence. The signal traveling in the opposite direction is coupled out of the second SMA coupling port. A detector collects the signal through the second multimode fiber. The system features a one-piece body design ensuring field ruggedness, dust tightness, and long-term stability. Though fine adjustment is possible on both SMA couplers, tuning was not necessary after shipment.
Copyright Princetel, Inc. All rights reserved.