|
|
Model SRG12 is a 12-circuit, low-cost, off-the-shelf, and "one-size-fits-all" slipring to most low-voltage applications,
especially video cameras. It is designed to accept Princetel's MJX series FORJs.
The compact integrated device is an ideal solution to modern industrial controls, sensors, robots, and medical equipments.
The picture on the left shows the integration of SRG12 with a singlemode MJX series FORJ.
The mounting flange design is compatible with most third-party products where three mounting holes are used.
So it can be a pop-in replacement. It also provides a more convenient mounting scheme with four mounting holes. Both the slipring and
the matching FORJ can be shipped with a short notice. Check out our model SRF24 sliprings for 24-circuit applications.
|
| SPECIFICATIONS |
|
 PARAMETERS |
VALUES |
| Ring contact material |
Gold |
| Brush contact material |
Gold |
| Number of rings |
12 |
| Housing material |
Anodized aluminum |
| Operating voltage |
240 V(RMS) |
| Operating current |
1 A/circuit |
| Noise level |
<100 milliohms@5 VDC |
| Leakage resistance |
>1000 megaohms |
| Contact resistance |
<100 milliohms (typical 50 milliohms) |
| R variation during rotation |
<10 milliohms (typical 1 milliohm) |
| Wire gauge |
28 AWG, copper w/silver plating, Telflon, 0.3 m |
| Start up torque |
<0.01 Nm |
| Rotation speed |
240 rpm |
| IP rating |
NA (slipring)/IP 68 (FORJ) |
| Working temperature |
-40 to 65 C |
| Storage temperature |
-50 to 85 C |
| Dimensions |
25mm (body dia.) x 39mm (body length) x 43mm (FD) |
| Weight |
30 g |
| Estimated life cycle |
>50 m revolutions/slipring; >500 m revolutions/FORJ |
|
|
CREATE YOUR PART NUMBER
|
SRG12MJX-
wavelength code-
fiber code-
connector code
|
SRG12MJXA-
wavelength code-
fiber code-
connector code
|
DOCUMENTS DOWNLOAD
|
|
|
|
|
CLICK for larger view